FREQUENTLY ASKED QUESTIONS
TAPERED MUZZLE DEVICES AND MOUNTS
What is our tapered line of muzzle devices and mounts?
- Our tapered muzzle devices and mounts are based off the very popular Q plan B system. This design is superior to others on the market, due to the taper being in front of the external threads on the muzzle device. With the taper being in front of the threads, this prevents carbon build up on the external threads of the muzzle device. The degree angle of this front taper design provides an excellent mating between the mount and muzzle device. This system allows you to install and remove the suppressor by hand, and do it with ease.
Why choose a tapered mount and muzzle device?
- Tapered muzzle devices are generally considered one of the best options for suppressors because the taper design helps create a tight seal with the suppressor, preventing gas leaks and ensuring optimal performance, while also making it easier to attach and detach the suppressor compared to standard direct thread mounts.
BOOSTERS
A suppressor booster, also known as a Nielsen Device or muzzle booster, is a device that helps a pistol cycle properly when a suppressor is attached. It allows the pistol to operate reliably by isolating the weight of the silencer from the barrel's rearward motion. If you are unclear as to whether or not your pistol requires a booster, please reach out to us and we will be happy to assist you.
How does it works?
- A spring loaded piston within the housing threads to the barrel.
- When the gun is fired, the gas enters the area and pulls the can away from the gun
- The spring compresses as the gun is fired
- When the slide comes back, the spring decompresses and snaps the barrel back down
Why is it needed?
- The weight of a silencer on the muzzle can cause a malfunctions that stop the pistol's operation. It will essentially turn your pistol into a single shot, as you will have to cycle the action after each shot.
When is it needed?
- A Booster is needed for pistols with a tilting barrel, which is the majority of pistols out there. If you do not know if you need a booster for your pistol please contact us and we will be happy answer your questions.
CHOOSING THE RIGHT STYLE MUZZLE DEVICE
- There are many different styles of muzzle devices out there. The three most common are brakes, compensators, and flash hiders. All have their advantages and disadvantages.
- BRAKES: A muzzle brake is primarily designed to reduce felt recoil. Recoil reduction offered from brakes is typically superior compared to that of compensators and flash hiders. A key disadvantage of a muzzle brake is the significant increase in concussion as muzzle brakes are designed to expel the muzzle blast perpendicular. When using a muzzle brake in conjunction with a suppressor the increased muzzle blast to the side becomes a non factor. A great advantage of utilizing a muzzle brake with your suppressor, is the that the muzzle brake acts as a sacrificial blast baffle. This will significantly increase the life of your blast baffle (first baffle in your suppressor). This can be especially important for Titanium and Aluminum suppressors. This is not as much of a factor for steel and Inconel suppressors.
- COMPENSATORS: A compensator primarily aims to reduce muzzle rise by directing escaping gases upwards or in a radial pattern, keeping the sights on target during rapid fire. Although muzzle brakes and compensators share much of the same advantages, there are better uses for one vs the other. A compensator is a great choice for firearms that will be used for sustained fire, as the compensator will do a superior job at keeping you on target. A compensator will also reduce erosion of your suppressor blast baffle as it will redirect the initial blast.
- FLASH HIDERS: A flash hider is designed to minimize the visible muzzle flash from a firearm, primarily used to protect a shooter's vision in low-light or night time conditions. A flash hider will offer little to no recoil reduction, as compared to muzzle brakes and compensators. A flash hider disperses and cools expanding gases exiting the muzzle to minimize visible signature. A flash hider will have little to no effect on protecting your suppressor's initial factor. This is not as much of a concern for steel and Inconel suppressors.
THREAD SIZE COMPATIBILITY
Threads sizes in the world of suppressors can be confusing and frustrating at times. We want to be as transparent as possible when it comes to informing our customers of thread size compatibility. We offer many different thread sizes for mounts, muzzle devices, and adapters. All products will have some form of a description for their thread size. If you have questions regarding thread size compatibility please reach out to us at sales@sdtacticalarms.com. Below are a few common thread sizes.
Common suppressor Mounts sizes
- HUB 1.375x24 (1-3/8x24)
- D-Size 1.4375x20 (1-7/16x20)
- B-Size 1.187x24 (1-3/16x24)
- Alpha 1.125-28 (1-1/8 28)
Tapered mount and muzzle devices
- Plan B (cherry bomb) - 0.9x24 (9/10x24)
Common calibers and associated thread size (Please note these are not true for all firearms)
- 1/2x28 - .223, 5.56, 9mm, 22lr (most all .224 calibers)
- 5/8x24 - .308, 300WM, 6.5CM, 6.5PRC, etc... (most all .243-.338 calibers)
- 9/16x24 - .40S&W, 10mm, and some 6.5mm calibers
- 37/64x28 - .45ACP pistols
SUPPRESSOR CLEANING AND MAITNENCE
- The frequency of cleaning your suppressor depends largely on the type of ammunition you use, with most high-pressure rifle suppressors requiring cleaning only every few thousand rounds, while rimfire suppressors may need cleaning after every few hundred rounds due to the higher fouling buildup from rimfire ammunition.
- Another recommendation to know whether your suppressor needs to be cleaned is to weigh it. If your suppressor has accumulated more than 1 ounce of weight in carbon build up, then it should be cleaned.
TORQUE SPEC FOR INSTALLING A MUZZLE DEVICE
- We generally recommend 25-30 ft-lbs